CATALOG
SEARCH
CONTACT
Hex Head Bolt SAE J429 Grade 5 Steel Plain - R. E. Glover Ltd. Supply

Products
Bolt
Hex Head




Category Fasteners
Sub Category Bolt
Type Hex Head
Standard SAE J429
Grade Grade 5
Material Steel
Coating Plain
Unit Inch
ANSI/ASME B18.2.1
Markings 3 radial lines. Manufacturer.
Description High Strength.

Hex Bolt Thread Full Length also known as a Tap Bolt.

Application External Thread, Tapped Hole, For Nut
Availability Stock Item.
Part Class 004: UNC
616: UNC TFL
005: UNF

Parts of Interest
Hex Nut SAE J995 Grade 5 Steel Plain
High Strength.
Part: 079: UNC, 080: ...
Round Flat Washer USS Steel Plain
Also known as a Round Washer. USS type Flat Washer has a larger O.D. than that of type SAE or F436. Washer thicknesses tend to vary significantly with type USS.
Part: 552...
Round Flat Washer SAE Steel Plain
Also known as a Round Washer. Dimensions similar to that of an F436 - Type 1 Structural Flat Washer, smaller O.D. than type USS Flat Washer.
Part: 549...
Spring Lock Washer Steel Plain
Round, split locking device.
Part: 565...
Thread Lock Adhesive Red
Temp Range -55C - 150C. Heat required to disassemble. Hardens in the absence of air. Fastens up to 1" diameter. Locks axles, bearings, bushings, sockets, gearwheels. Pre-cleaning NOT necessary. Density: 1.11 g/cm3, Viscosity: 500-900 mPas.**DISCONTINUED**
Part: 995.4102-100...

Related Products
Hex Head Bolt L9 Steel Plated
High Strength. Tensile Strength Min: 180 ksi.
Part: 015: UNC, 016: ...
Hex Head Bolt SAE J429 Grade 2 Steel Plain
General Purpose. Hex Bolt Thread Full Length also known as a Tap Bolt.
Part: 001: UNC, 013: ...
Hex Head Bolt SAE J429 Grade 2 Steel Plated
General Purpose. Hex Bolt Thread Full Length also known as a Tap Bolt.
Part: 002: UNC, 012: ...
Hex Head Bolt SAE J429 Grade 5 Steel Plated
High Strength. Hex Bolt Thread Full Length also known as a Tap Bolt.
Part: 006: UNC, TAPP:...
Hex Head Bolt SAE J429 Grade 8 Steel Plated
High Strength.
Part: 009: UNC, 011: ...
Hex Head Bolt SAE J429 Grade 8 Steel Plain
High Strength. Hex Bolt Thread Full Length also known as a Tap Bolt.
Part: 008: UNC, 617: ...
Hex Head Bolt Steel Galvanized
High Strength. For use with a tapped oversize internally threaded nut or hole.
Part: 003: Gr 2 UNC, ...
Body Diameter BasicBody Diameter MaxBody Diameter MinWidth Across Flats BasicWidth Across Flats MaxWidth Across Flats MinWidth Across Corners MaxWidth Across Corners MinHead Height BasicHead Height MaxHead Height MinRadius of Fillet MaxRadius of Fillet MinThread Length 6" and ShorterThread Length Over 6"
1/40.2600.2377/160.4380.4250.5050.48411/640.1880.1500.030.010.7501.000
5/160.3242.9801/20.5000.4840.5770.5527/320.2350.1950.030.010.8751.125
3/80.3880.3609/160.5620.5440.6500.6201/40.2680.2260.030.011.0001.250
7/160.4520.4215/80.6250.6030.7220.68719/640.3160.2720.030.011.1251.375
1/20.5150.4823/40.7500.7250.8660.82611/320.3640.3020.030.011.2501.500
5/80.6420.60515/160.9380.9061.0831.03327/640.4440.3780.060.021.5001.750
3/40.7680.7291-1/81.1251.0881.2991.2401/20.5240.4550.060.021.7502.000
7/80.8950.8521-5/161.3121.2691.5161.44737/640.6040.5310.060.022.0002.250
11.0220.9761-1/21.5001.4501.7321.65343/640.7000.5910.090.032.2502.500
1-1/81.1491.0981-11/161.6881.6311.9491.8593/40.7800.6580.090.032.5002.750
1-1/41.2771.2231-7/81.8751.8122.1652.06627/320.8760.7490.090.032.7503.000
1-3/81.4041.3452-1/162.0621.9942.3822.27329/320.9400.8100.090.033.0003.250
1-1/21.5311.4702-1/42.2502.1752.5982.48011.0360.9020.090.033.2503.500
1-3/41.7851.7162-5/82.6252.5383.0312.8931-5/321.1961.0540.120.043.7504.000
22.0391.96433.0002.9003.4643.3061-11/321.3881.1750.120.044.2504.500
2-1/42.3052.2143-3/83.3753.2623.8973.7191-1/21.5481.3270.190.064.7505.000
2-1/22.5592.4613-3/43.7503.6254.3304.1331-21/321.7081.4790.190.065.2505.500
2-3/42.8272.7114-1/84.1253.9884.7634.5461-13/161.8691.6320.190.065.7506.000
33.0812.9614-1/24.5004.3505.1964.95922.0601.8150.190.066.2506.500
3-1/43.3353.2104-7/84.8754.7125.6295.3722-3/162.2511.9360.190.066.7507.000
3-1/23.5893.4615-1/45.2505.0756.0625.7862-5/162.3802.0570.190.067.2507.500
3-3/43.8583.7265-5/85.6255.4376.4956.1982-1/22.5722.2410.190.067.7508.000
44.1113.97566.0005.8006.9286.6122-11/162.7642.4240.190.068.2508.500
Made to OrderInput Values
Quantity:-
Material / Specification:-
Bolt Diameter:-
Bolt Length:-
Thread Length:-
Thread Pitch:-
Non-Coated or Coated:-